RESEARCH GROUP COMPUTED TOMOGRAPHY

UNIVERSITY OF APPLIED SCIENCES UPPER AUSTRIA - RESEARCH & DEVELOPMENT LTD.

Publikationen 2012

[1] J. Kastner, B. Harrer, G. Requena, Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[2] J. Kastner, D. Salaberger, B. Plank, High resolution X-ray computed tomography of fibre and particle filled polymers, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[3] J. Kastner, B. Plank, C. Kottler, V. Revol, Comparison of phase contrast X-ray computed tomography methods for non-destructive testing of materials, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[4] D. Salaberger, T. Koch, Y. Voronko, S. Seidler, J. Kastner, Comparison of particle size distribution derived from 2D and 3D analysis for particle filled polymers, Proceedings POLYCHAR 2012, World Forum on Advanced Materials, 26-30. March 2012 Dubrovnik, Croatia

[5] J. Kastner, B. Plank, G. Requena, Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography, Materials characterization 64, 79-87 (2012)

[6] A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl, Porosity Maps - Interactive Exploration and Visual Analysis of Porosity in Carbon Fiber Reinforced Polymers - COMPUTER GRAPHICS FORUM 31, No. 3, 1185-1194 (2012)

[7] C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, C. Gusenbauer, Optimal Specimen Placement in Cone Beam X-ray Computed Tomography - NDT & E INTERNATIONAL 99, 1-25 (2012)

[8] J. Kastner, B. Plank, D. Salaberger, K. Kannappan, Quantitative Evaluierung von Röntgen-CT-Daten von glasfaserverstärkten Kunststoffen zur Bestimmung von Faserlängenverteilung und -orientierung. Proceeding FFH 2012, April 2012, Graz

[9] J. Kastner, B. Plank, C. Gusenbauer, B., G. Requena, 3D-Mikrogefügeuntersuchungen an Leichtmetalllegierungen mittels hochauflösender Röntgen-Computertomografie, Proceedings 7. Ranshofener Leichtmetalltage, 7.+8. Nov. 2012, Gmunden

[10] M. Reiter, M. Krumm, S. Kasperl, C. Kuhn, M. Erler, D. Weiß, C. Heinzl, C. Gusenbauer, J. Kastner, Evaluation of transmission based image quality optimisation for X-ray computed tomography, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[11] A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, E. Gröller, Evaluation of Projection-Based Metal-Artifact Reduction for Multi-Material Components, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[12] J. Charwat-Pessler, E. Wernersoon, B. Plank, M. Musso, K. Entacher, P. Schuller-Götzburg, G. Standfest, B. Mies, A. Petutschnigg, 3D Analysis of heterogenous and biogenic structures based on bone augmentation material, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[13] M. Jerabek, M. Reiter, H. Herbst; B. Plank, D. Salaberger, Z. Major, Characterization of Short Fiber Reinforced Polypropylene Composites, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[14] M. Tóth, G. Moser, C. Gusenbauer, Analysis of the middle ear mechanics with micro-CT, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[15] S. Großeiber, G. Requena, E. Kozeschnik, C. Gusenbauer, S. Ilie, Correlation between hot ductility and damage in microalloyed steel slabs, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[16] B. Plank - Vom Granulat zum Spritzgussbauteil: Einfluss der Spritzgussprozesskette auf die Faserlängenverteilung bestimmt durch Röntgen- Computer-Tomografie. - Master/Diploma Thesis, FH OÖ Studienbetriebs GmbH, Österreich, 2012, pp. 150

[17] G. Standfest, A. Kutnar, B. Plank, A. Petutschnigg, F. Kamke, M. Dunky - Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography - WOOD SCIENCE AND TECHNOLOGY, Vol. 46, No. 4, 2012, pp. 19

[18] T. Koch, D. Salaberger, Methods for Characterizing the 3-D Morphology of Polymer Composites, MACROMOLECULAR SYMPOSIA, Vol. 315, No. 1, 2012, pp. 115-124

[19] D. Salaberger, H. Scharleitner, J. Kastner, 3D Analyse der Tinteausbreitung in Polymerschäumen mit Hilfe von Röntgen-Mikro Computertomografie, DACH-Jahrestagung 2012, 17.-19. September 2012, Graz/Austria

[20] H. Qureshi, M. Malik, M.A. Ahmad, C. Heinzl, Benchmarking of De-noising Techniques for Streaking Artifacts in Industrial 3DXCT Scan Data, 20th International Conference on Computer Graphics, Visualization and Computer Vision 2012, WSCG 2012, June 25-28, 2012, Pilsen, Czech Republic, pp. 8

[21] J. Kastner, D. Salaberger, B. Plank, A. Reh, C. Heinzl - Advanced X-ray tomographic methods for quantitative characterisation of carbon fibre reinforced polymers - Proceedings 4th International symposium on NDT in Aerospace, Augsburg, Germany, 2012

[22] J. Kastner, D. Salaberger, B. Plank - High resolution X-ray computed tomography of fibre and particle reinforced plastics - DACH NDT Annual Meeting 2012, Graz, Austria, 2012

[23] B. Heise, S. Schausberger, S. Häuser, B. Plank, D. Salaberger, E. Leiss-Holzinger, D. Stifter - Full-field optical coherence microscopy with a sub-nanosecond supercontinuum light source for material research - OPTICAL FIBER TECHNOLOGY, Vol. 18, No. 5, 2012, pp. 403-410

[23] G. Standfest, M. Dunky, S. Kranzer, B. Plank, D. Salaberger, A. Petutschnigg - 3D pore size characterisation by means of image analysis and mathematical morphology - JOURNAL "HOLZTECHNOLOGIE", Vol. 53, No. 5, 2012, pp. 39-45

Aktuelle Seite: Home Publikationen 2012