RESEARCH GROUP COMPUTED TOMOGRAPHY

UNIVERSITY OF APPLIED SCIENCES UPPER AUSTRIA - RESEARCH & DEVELOPMENT LTD.

Publikationen 2012

[1] J. Kastner, B. Harrer, G. Requena, Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[2] J. Kastner, D. Salaberger, B. Plank, High resolution X-ray computed tomography of fibre and particle filled polymers, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[3] J. Kastner, B. Plank, C. Kottler, V. Revol, Comparison of phase contrast X-ray computed tomography methods for non-destructive testing of materials, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[4] D. Salaberger, T. Koch, Y. Voronko, S. Seidler, J. Kastner, Comparison of particle size distribution derived from 2D and 3D analysis for particle filled polymers, Proceedings POLYCHAR 2012, World Forum on Advanced Materials, 26-30. March 2012 Dubrovnik, Croatia

[5] J. Kastner, B. Plank, G. Requena, Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography, Materials characterization 64, 79-87 (2012)

[6] A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl, Porosity Maps - Interactive Exploration and Visual Analysis of Porosity in Carbon Fiber Reinforced Polymers - COMPUTER GRAPHICS FORUM 31, No. 3, 1185-1194 (2012)

[7] C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, C. Gusenbauer, Optimal Specimen Placement in Cone Beam X-ray Computed Tomography - NDT & E INTERNATIONAL 99, 1-25 (2012)

[8] J. Kastner, B. Plank, D. Salaberger, K. Kannappan, Quantitative Evaluierung von Röntgen-CT-Daten von glasfaserverstärkten Kunststoffen zur Bestimmung von Faserlängenverteilung und -orientierung. Proceeding FFH 2012, April 2012, Graz

[9] J. Kastner, B. Plank, C. Gusenbauer, B., G. Requena, 3D-Mikrogefügeuntersuchungen an Leichtmetalllegierungen mittels hochauflösender Röntgen-Computertomografie, Proceedings 7. Ranshofener Leichtmetalltage, 7.+8. Nov. 2012, Gmunden

[10] M. Reiter, M. Krumm, S. Kasperl, C. Kuhn, M. Erler, D. Weiß, C. Heinzl, C. Gusenbauer, J. Kastner, Evaluation of transmission based image quality optimisation for X-ray computed tomography, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[11] A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, E. Gröller, Evaluation of Projection-Based Metal-Artifact Reduction for Multi-Material Components, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[12] J. Charwat-Pessler, E. Wernersoon, B. Plank, M. Musso, K. Entacher, P. Schuller-Götzburg, G. Standfest, B. Mies, A. Petutschnigg, 3D Analysis of heterogenous and biogenic structures based on bone augmentation material, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[13] M. Jerabek, M. Reiter, H. Herbst; B. Plank, D. Salaberger, Z. Major, Characterization of Short Fiber Reinforced Polypropylene Composites, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[14] M. Tóth, G. Moser, C. Gusenbauer, Analysis of the middle ear mechanics with micro-CT, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[15] S. Großeiber, G. Requena, E. Kozeschnik, C. Gusenbauer, S. Ilie, Correlation between hot ductility and damage in microalloyed steel slabs, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[16] B. Plank - Vom Granulat zum Spritzgussbauteil: Einfluss der Spritzgussprozesskette auf die Faserlängenverteilung bestimmt durch Röntgen- Computer-Tomografie. - Master/Diploma Thesis, FH OÖ Studienbetriebs GmbH, Österreich, 2012, pp. 150

[17] G. Standfest, A. Kutnar, B. Plank, A. Petutschnigg, F. Kamke, M. Dunky - Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography - WOOD SCIENCE AND TECHNOLOGY, Vol. 46, No. 4, 2012, pp. 19

[18] T. Koch, D. Salaberger, Methods for Characterizing the 3-D Morphology of Polymer Composites, MACROMOLECULAR SYMPOSIA, Vol. 315, No. 1, 2012, pp. 115-124

[19] D. Salaberger, H. Scharleitner, J. Kastner, 3D Analyse der Tinteausbreitung in Polymerschäumen mit Hilfe von Röntgen-Mikro Computertomografie, DACH-Jahrestagung 2012, 17.-19. September 2012, Graz/Austria

[20] H. Qureshi, M. Malik, M.A. Ahmad, C. Heinzl, Benchmarking of De-noising Techniques for Streaking Artifacts in Industrial 3DXCT Scan Data, 20th International Conference on Computer Graphics, Visualization and Computer Vision 2012, WSCG 2012, June 25-28, 2012, Pilsen, Czech Republic, pp. 8

[21] J. Kastner, D. Salaberger, B. Plank, A. Reh, C. Heinzl - Advanced X-ray tomographic methods for quantitative characterisation of carbon fibre reinforced polymers - Proceedings 4th International symposium on NDT in Aerospace, Augsburg, Germany, 2012

[22] J. Kastner, D. Salaberger, B. Plank - High resolution X-ray computed tomography of fibre and particle reinforced plastics - DACH NDT Annual Meeting 2012, Graz, Austria, 2012

[23] B. Heise, S. Schausberger, S. Häuser, B. Plank, D. Salaberger, E. Leiss-Holzinger, D. Stifter - Full-field optical coherence microscopy with a sub-nanosecond supercontinuum light source for material research - OPTICAL FIBER TECHNOLOGY, Vol. 18, No. 5, 2012, pp. 403-410

[23] G. Standfest, M. Dunky, S. Kranzer, B. Plank, D. Salaberger, A. Petutschnigg - 3D pore size characterisation by means of image analysis and mathematical morphology - JOURNAL "HOLZTECHNOLOGIE", Vol. 53, No. 5, 2012, pp. 39-45

Publikationen 2011

[1] J. Kastner, B. Harrer, and H.-P. Degischer, High resolution cone beam x-ray computed tomography for 3D-microstructure characterization of Al-alloys, Materials characterization 62, 99-107 (2011)

[2] D. Salaberger, K.A. Kannappan, J. Kastner, J. Reussner, and T. Auinger, CT Data evaluation of fibre reinforced polymers to determine fibre length distribution, International Polymer Processing 3, 283-291 (2011)

[3] J. Kastner, R. Kickinger, and D. Salaberger, High resolution X-ray computed tomography for 3D-microstructure characterisation of a cellulose particle filled polymer foam, Journal of cellular plastics 47, 567-578 (2011)

[4] A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, and E. M. Gröller, Projection-Based Metal-Artifact Reduction for 3DCT, IEEE Transactions on Visualization and Computer graphics 17, 2193 - 2202 (2011)

[5] M. Rodríguez-Hortalá, D. Salaberger, S. Hernández, M. Holzmeier, H.-P. Degischer, and J. Kastner, Mechanical and structural characterisation of defects in CFRP (carbon fibre reinforced polymer) materials, DGM-Symposium für Verbundwerkstoffe und Werkstoffverbunde, 30. March- 1. April 2011, Chemnitz/GE

[6] C.Heinzl, A.Amirkhanov, J.Kastner, E.Göller, M.Reiter, Fast estimation of optimal specimen placements in 3D X-ray computed tomography, International Symposium on Digital Industrial Radiology and Computed Tomography 2011, 20.-22. June 2011, Berlin/GE

[7] J. Kastner, D. Salaberger, and B. Plank, Phase contrast imaging with high resolution cone beam X-ray computed tomography, International Symposium on Digital Industrial Radiology and Computed Tomography 2011, 20.-22. June 2011, Berlin/GE

[8] M. Reiter, B. Harrer, D. Salaberger, C. Heinzl, C. Gusenbauer, C. Kuhn, and J. Kastner, Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation, International Symposium on Digital Industrial Radiology and Computed Tomography 2011, 20.-22. June 2011, Berlin/GE

[9] B. Harrer, G. Requena, H.-P. Degischer, G. Xia, S. Ilie, and J. Kastner, 3D distribution of pores in continuously cast steel slabs investigated by multi-scale X-ray computed tomography, EUROMAT 2011, Sep. 2011, Montpellier/F

[10] C. Gierl, B. Harrer, H. Danninger, J. Kastner, R. Schneider, X-ray computed Tomography for Quantification of Secondary Pore Structures in PM Steels, International Conference on Deformation and Fracture in PM materials – DFPM 2011, 6–9. November, 2011, Stará Lesná, High Tatras, Slovakia

[11] J. Kastner, B. Harrer, R. Kickinger, G. Requena, Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography, 3DMM - 3D Microstructure Meeting, Saarbrücken, Germany, November 2nd – 4th, 2011

[12] J. Kastner, B. Plank, D. Salaberger, High resolution absorption and phase contrast computed tomography with a polychromatic X-ray source for materials characterization, 3DMM - 3D Microstructure Meeting, Saarbrücken, Germany, November 2nd – 4th, 2011

[13] B. Harrer and J. Kastner, Bookchapter: Cone Beam CT for non-destructive testing Fabrication and Characterization in the Micro-Nano Range: New Trends for two and three Dimensional Structures, X-ray Microtomography: characterisation of structures and defect analysis, Springer Verlag, Heidelberg, 119-150, 2011

Publikationen 2010

  1. [1] J. Kastner, B. Plank, D. Salaberger, J. Sekelja, Defect and porosity determination of fibre reinforced polymers by x-ray Computed Tomography, 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Germany, 2010
  2. [2] E. Heiss, D. Salaberger, Hurt yourself to hurt your enemy: new insights on the function of the bizarre antipredator mechanism in the salamandrid Pleurodeles waltl, JOURNAL OF ZOOLOGY, Vol. 280, No. 2, 2010, pp. 156-162
  3. [3] G. Mayr, B. Plank, J. Sekelja, G. Hendorfer, Pulsed Thermography and Ultrasonic Testing for Non Destructive Testing of Porous Carbon Fiber Reinforced Polymers. NDT&E Int. 2010. (submitted)
  4. [4] S. Rosner, J. Konnerth, B. Plank, D. Salaberger, C. Hansmann, Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce wood, Trees Structure and Function.
  5. [5] B. Chyba, M. Mantler, M. Reiter, Monte Carlo Simulation for the evaluation of various influence factor for on projections in computed tomography, Powder Diffraction Journal Vol. 25
  6. [6] B. Plank, D. Salaberger, J. Kastner, High Resolution X-ray CT for Polymer Materials Science - 2nd Int. Symposium on NDT in Aerospace, Hamburg, Germany, 2010, pp. 3
  7. [7] C. Heinzl, M. Reiter, M. Allerstorfer, E. Gröller, J. Kastner, Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen, DGZfP Erfurt, Germany, 2010
  8. [8] J. Kastner, B. Harrer, G. Requena, O. Brunke, A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys. NDT&E Int. 2010, Vol. 43, No. 10, 2010, pp. 599-605
  9. [9] G. Standfest, S. Kranzer, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky, 3D Microstructure Characterization of Wood Based Panels, Proceedings 1st International Conference on Processing Technologies for the Forest and Biobased Products Industries, Kuchl, Austria, 2010, pp. 6
  10. [10] G. Standfest, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky, Sub-micron-CT for the characterization of wood based panels, Journal "HOLZTECHNOLOGIE", Vol. 51, No. 4, 2010, pp. 44-49
  11. [11] B. Plank, J. Kastner, J. Sekelja, D. Salaberger - Porositätsbestimmung in kohlefaserverstärkten Kunststoffen mittels Röntgen-Computertomografie - Tagungsband des 4. Forschungsforum der österreichischen Fachhochschulen, Pinkafeld, Österreich, 2010, pp. 321-328
  12. [12] D. Salaberger, B. Plank, B. Harrer, J. Kastner, O. Brunke, H. Degischer, Comparative study of high resolution cone beam X-ray computed tomography methods and discussion of temperature influence on Nanotom stability, Book of Abstracts: High Resolution X-ray CT Symposium, Dresden, Germany, 2010, pp. 37
  13. [13] M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, J. Kastner, Study on parameter variation of an industrial computed tomography simulation tool concerning dimensional measurement deviations, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
  14. [14] B. Harrer, H.P. Degischer, J. Kastner, Microfocus computed x-ray tomography of segregations in high strength aluminium alloys, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
  15. [15] J. Kastner, B. Harrer, V. Carl, H. Traxler, Computed tomography and pulsed thermography of carbon reinforced carbon/copper components for thermo-nuclear fusion. Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
  16. [16] C. Heinzl, J. Kastner, E. Gröller, Uncertainty Visualization of Computed Tomography Datasets from Industrial Components using Statistical Analysis, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
  17. [17] M. M. Malik, C. Heinzl, E. Gröller - Comparative Visualization for Parameter Studies of Dataset Series - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 9999, No. 9999, 2010, pp. 8
  18. [18] J. Kastner, R. Kickinger, D. Salaberger, Structural analysis of polymeric foams by Sub-µm X-Ray computed tomography, CNDT 2010, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
  19. [19] D. Salaberger, K. Arunachalam Kannappan, J. Kastner, J. Reussner, T. Auinger, CT Data Evaluation of Fibre Reinforced Polymers to Determine Fibre Length Distribution, PPS26-2010, Banff, Canada, Canada, 2010
  20. [20] S. Müller, D. Salaberger, Analysis of a belt buckle from Mautern on a technical basis, Archaeology, Austria, Vol. 21, No. 1, 2010, pp. 60-65
  21. [21] J. Kastner, B. Harrer, D. Salaberger, X-Ray Computed Tomography of materials for light-weight applications in Energyefficient Mobility, Shaker Verlag, 2010
  22. [22] J. Kastner, Proceedings Industrielle Computertomografie 2010, Wels, Austria, 2010
  23. [23] M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, C. Kuhn, J. Kastner, Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 163-173
  24. [24] D. Salaberger, K. Arunachalam Kannappan, J. Kastner, Method for the 3D characterisation of fibres in reinforced polymers, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 51-58
  25. [25] M. Hochegger, B. Harrer, S. Ilie, H.P. Degischer, Darstellung von Schädigungsmechanismen in Baustahlbrammen mittels Röntgen-Computertomografie, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 93-100
  26. [26] J. Crespo-Casanova, H.P. Degischer, C. Ladron, E. Maire, K. Track, B. Harrer, In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 101-105
  27. [27] M. Wurm, C. Hofer, H. Traxler, A. Zabernig, B. Harrer, Vermessung der Laserbohrungen in faserverstärktem Graphit mittels Optischer Kohärenztomographie, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 133-139
  28. [28] G. Standfest, S. Kranzer, B. Plank, A. Petutschnigg, M. Dunky, Anwendung der Sub-µm CT zur Charakterisierung von Holzwerkstoffen, Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Austria, 2010, pp. 65-70
  29. [29] B. Plank, J. Sekelja, G. Mayr, J. Kastner, Porositätsbestimmung in der Flugzeugindustrie mittels Röntgen-Computertomografie, Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Austria, 2010, pp. 25-34
  30. [30] A. Amirkhanov, C. Heinzl, M. Reiter, E. Gröller, Visual Optimality and Stability Analysis of 3DCT Scan Positions, 21st IEEE Visualization Conference, Salt Lake City, Utah, USA, 24-29. October 2010
  31. [31] J. Crespo-Casanova, H.P. Degischer, C. Landron, E. Maire, B. Harrer, K. Track, Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl, Tagung Werkstoffprüfung, Neu-Ulm, 2. - 3. Dez. 2010. (in print)
  32. [32] M. Schöbel, V. Paffenholz, B. Harrer, M. Di Michiel, H.P. Degischer, 3D Characterization of Thermal Fatigue Damage in SiC Fiber Reinforced Copper, 13. Internationale Metallographie-Tagung, Leoben, 29. Sept. - 1. Okt. 2010 (in print)
  33. [33] B. Harrer, J. Kastner, X-ray Microtomography, characterisation of structures and defect analysis, Fabrication and Characterization in the Micro-Nano Range: New Trends for two and three Dimensional Structures, Springer Verlag, Heidelberg, 2010, pp 32 (in print)
Aktuelle Seite: Home Forschung Publikationen